DO/CTL/OpCodes

From Dark Omen Wiki

(Difference between revisions)
Jump to: navigation, search
(Add documentation for known opcodes up to 25h)
m (move toc to the right)
Line 1: Line 1:
 +
<div style="float:right; margin-left: 2em; padding: 1em;">
 +
__TOC__
 +
</div>
 +
== init_unit (00) ==
== init_unit (00) ==

Revision as of 12:33, 8 April 2012

Contents

init_unit (00)

Argument Explanation
unk unknown purpose

This function initializes some data structures of the unit to it's default values. It should be used as the first function called by a unit script.

wait_for_deploy (01)

Blocks the execution of the units script until the deployment phase is finished.

In the deployment phase it sets bit 31 of unit flag 1. At the end of the phase it clears the bit.

reset_call_stack (02)

Resets the units stack. Don't call this when you have to return from a function or are in a loop.

restore_ip (03)

Restores the state saved with save_ip (execution continues after the save_ip call). All events get marked as handled so unhandled events are lost.

save_ip (04)

Stores the current state of the instruction pointer (current function, position in function, number of free stack slots). Note that the stack itself is not saved!

do (05)

Begins a do-loop (pushes position of next opcode on the stack). This loop is always executed at least once.

always (06)

Usually used at the end of a do-loop. Pops from the stack and continues script execution at this position (this is usually the command following the do-statement).

while (07)

Usually used at the end of a do-loop. Pops from the stack and checks the conditional flag:

Condition Result
true Continue execution at stack position
false Continue execution with command after while

while_not (08)

Usually used at the end of a do-loop. Pops from the stack and checks the conditional flag:

Condition Result
true Continue execution with command after while_not
false Continue execution at stack position

for (09)

Begins a for-loop.

Argument Explanation
num_loops How often the loop shall be executed.

Pushes two elements on the stack: The position of the next opcode and how often loop shall be executed.

next (0A)

Usually used at the end of a for-loop.

Pops the loop counter from the stack and decrements it by one. If it is higher then 0 it's pushed again and the execution continues after the for-command (2nd stack element). Otherwise the 2nd element is popped too and execution continues after the next-command.

goto (0B)

Continues execution at the beginning of a function.

Argument Explanation
func Number of the function to execute

Note that the call stack is not altered. So you shouldn't call this while you are in a loop because it leaves garbage on the stack (call reset_call_stack to clear the stack).

branch1 (0C)

ToDo. The branch-functions basicly execute a function depending on the state of the control flag.

Argument Explanation
func Number of the function to execute

branch2 (0D)

ToDo.

Argument Explanation
func Number of the function to execute

branch3 (0E)

ToDo.

Argument Explanation
func Number of the function to execute

branch4 (0F)

ToDo.

Argument Explanation
func Number of the function to execute

branch5 (10)

ToDo.

Argument Explanation
func Number of the function to execute

call (11)

Calls a function (use with return).

Argument Explanation
func Number of the function to execute

Pushes the position of the next opcode and the current function on the stack.

return (12)

Pops two elements from the stack (function and position). Use with call.

Don't call return while you are in a loop because the stack top contains the wrong element!

return_from_evthandler (13)

ToDo. Used in event handlers to return.

sleep (15)

Pauses the script execution (script of next unit gets executed). Next time the execution continues with the command after sleep.

sleep_if_true (16)

Pauses the script execution based on the conditional flag:

Condition Result
true Script of next unit is executed. Next time the execution continues with the command after sleep.
false No sleep. Execution continues with the command after sleep_if_true

skip_if_true (17)

Skips instructions based on the state of the conditional flag.

Argument Explanation
num_skip How many commands to skip. This value must be 1 + number of arguments. E.g. if you want to skip a function that takes two arguments num_skip must be 3.
Condition Result
true num_skip commands are skipped
false Execution continues with the next command

set_timer (18)

Sets a timer for the unit (or overwrites the old). The speed of the timer is unknown.

Argument Explanation
timer New value for the timer

test_waiting_for_timer (19)

Sets the conditional flag to true if the timer is not 0.

wait_for_timer (1A)

Pauses script execution until the timer is not 0.

set_x_i (1B)

Sets the value of the unknown local register x (= purpose is unknown).

Argument Explanation
value Sets x to value.

add_x_i (1C)

Adds a value to the unknown local register x (= purpose is unknown).

Argument Explanation
value Adds value to x.

test_x_eq_0 (1D)

Sets the conditional flag to true if the unknown local register x is 0.

set_unit_r_i (1E)

Sets a local register to a value.

Argument Explanation
register Local register to write
value Sets register to value

Every unit has 8 registers, so the register parameter should be from 1 to 8. Other values will overwrite other memory!

add_unit_r_i (1F)

Adds a value to a local registers value.

Argument Explanation
register Local register to write
value value added to value in register

Every unit has 8 registers, so the register parameter should be from 1 to 8. Other values will overwrite other memory!

test_unit_r_eq_i (20)

Sets the conditional flag to true if the value in a units register equals a value.

Argument Explanation
register Register to check
value Value the registers value is compared against

Use register -278 to check against the unit Id.

test_unit_r_eq_r (21)

Sets the conditional flag to true if two local registers contain the same value.

Argument Explanation
register1 First register
register2 Second register

Use register -278 to check against the unit Id.

set_unit_r_random1to10 (22)

Assigns a "random" value (the value changes every second) in a range form 1 to 10 to a local register.

Argument Explanation
register Register to write

Every unit has 8 registers, so the register parameter should range from 1 to 8. Other values will overwrite other memory!

set_global_r_i (23)

Assigns a value to a global register.

Argument Explanation
register Global register to write
value Value to assign to the register

There are 8 registers, so the register parameter should range from 1 to 8. Other values will overwrite other memory!

add_global_r_i (24)

Adds a value to the value in a global register.

Argument Explanation
register Global register to write
value Value to add to the registers value

There are 8 registers, so the register parameter should range from 1 to 8. Other values will overwrite other memory!

test_global_r_eq_i (25)

Sets the conditional flag to true if the value in a global register equals a value.

Argument Explanation
register Global register to test
value Value to test against
Personal tools
communication